This report lists zERT entries where there was no recognized cryptographic protection for the connection. There might have been cryptographic protection that was not recognized by zERT.
Entries are grouped by local IP address and server port.
The report is divided into Server and Client tabs.
Report Parameters
Parameter |
Description |
System |
Filter by system. |
Jobname |
Filter by local job name. |
Userid |
Filter by local userid. |
IP Address |
Filter by local or remote IP address |
Port |
Filter by server port |
Exclude Loopback |
Exclude connections to the loopback address 127.0.0.1 or ::1 from the report. |
Exclude AT-TLS Optimized |
Exclude connections where AT-TLS data protection was bypassed for intra-host connections. |
Columns
Column |
Description |
System |
The system that wrote the record. |
Server IP |
IP Address of the server end of the connection. |
Client IP |
IP Address of the client end of the connection. |
Port |
The server port for the connection, or the starting value of the port range. |
Port End |
The end value of the port range. |
IP Protocol |
TCP or UDP |
Active FTP |
The entries represent an outbound connection from the server for active mode FTP (as opposed to passive mode FTP). |
Entries |
The number of entries in this grouping. |
Jobname |
The z/OS job name associated with the socket. |
Userid |
The z/OS userid associated with the socket. |
From |
The start time of the first grouped interval. |
To |
The end time of the last grouped interval. |
Connections |
The count of connections in the group - the end connection count minus start connection count for each interval. |
Short Connections |
The count of short connections (less than 10 seconds). |
Partial Connections |
The count of partial connections: connections where the connection existed before or continued to exist after the security session. |
AT-TLS Optimized |
AT-TLS data protection was bypassed for intra-host connections. |